Ledj Q Batten LEDJ300 User Manual - page 4
Fade Mode
Press the MENU button to select
Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to select the
(FA00-99) or
(FF00-99) mode. Once the mode has been selected,
press the ENTER button to confirm.
Auto Mode
Press the MENU button to select
. Press the ENTER button and the unit
will run a self-test with its built-in programs.
Slave mode
Press the MENU button to select
. Press the ENTER button to confirm
and
will be showed on the display.
Sound Mode
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to adjust the sound sensitivity
via the value 00-99. Once the value has been selected, press the ENTER
button to confirm.
Channel Mode
Press the MENU button to select the
(2 Channel) mode,
(3
Channel) mode,
(4 Channel) mode or
(7 Channel) mode via the
DOWN and UP buttons. Once the mode has been selected, press the ENTER
button to confirm.
4. DMX 512 Address setting
Press the MENU button to select
. Press the ENTER button and the
display will blink. Use the DOWN and UP buttons to choose the (A001-A512)
address, press the ENTER button to confirm.
5. How to Control the unit
5.1. Master/slave built-in preprogram function
There is no need to turn the unit off when you change the DMX address as the
new DMX address setting will take effect at once.
5.2. Universal DMX Controller
By using a universal DMX controller to control the units, you will need to set a
DMX address from 1 to 512 so that the units can receive a DMX signal. Press
the MENU button until
is showing on the display. Press the ENTER
button and the display will blink. Use the DOWN and UP buttons to change the
DMX 512 address. Once the address has been selected, press the ENTER
button to confirm.
Please refer to the below diagram to address your first 4 units
:
Channel
mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
2 channel
1
3
5
7
3 channel
1
4
7
10
4 channel
1
5
9
13
7 channel
1
8
15
22
5.3 DMX 512 Configuration
2 CHANNEL MODE
Channel
Value
Function
1CH
0-240
Master dimmer
241-255
Strobe
2CH
0-4
Black out
5-80
Colour Macro
81-150
Colour Jump
151-255
Colour Fade
3 CHANNEL MODE
Channel
Value
Function
1CH
0-255
Red 0-100%
2CH
0-255
Green 0-100%
3CH
0-255
Blue 0-100%