Lockwood Digital Deadbolt User Manual - Set Up User Codes
11
Set Up User Codes
Step 1
Press the key to enter Master PIN Code Registration.
Step 2
Press the key followed by the key.
Step 3
Enter a unique 4-8 digit Master PIN code followed by the key.
Maximum number of user codes is twenty (20).
Protect your privacy; always shield your PIn code entry.
User Codes can only be programmed through the Master Code.
1. Enter the 4-8 digit Master PIN code followed by the key.
2. Press the key followed by the key.
3. Press the key followed by the key.
4. Enter the User number to be registered (1-20) followed by the key.
5. Enter a 4-8 digit PIN code for the User number followed by the key.
notE: When registering User codes, the code must be entered within 20 seconds.
If time expires, no codes are registered and the process must be re-started.
Register Master PIn Code before Programming
operation
PIn code structure
Enter the new Master PIN code
(4~8digits), followed by the key.
Touch screen with the back
of your hand or fingers to activate.
Press the key followed by
the key.
1
2
3