Mackie TT24 Quick Start Manual - 6.8.2 Clear

43

Owner’s Manual

Owner’

s Manual

6.8.2 CLEAR 

Click the 

CLEAR

 button to clear the selected snap-

shot. The snapshot is deleted and the name returns 

to 

Empty

. Attempting to clear a protected snapshot 

produces a warning message. 

6.8.3 STORE 

Click the 

STORE

 button to store the current console 

state (with filtering if active) in the selected snapshot. 

Attempting to store over a protected snapshot produces 

a warning message. 

6.8.4 RECALL 

Click the 

RECALL

 button to recall the selected snap-

shot (with filtering if active). 

6.8.5 Snapshot Filtering 

Snapshots can be filtered so only the desired channels 

and/or parameters are stored and recalled. Snapshot 

filtering can be useful in a variety of situations: 

•  recall Fader, and Mute settings while leaving DSP 

settings unaffected 

•  recall settings on a few channels leaving the rest 

unchanged 

•  change internal effects presets through a specific 

order while leaving every other console setting for 

live use 

The Snapshots window has the following areas rel-

evant to filtering: 

•  SNAPSHOT PARAMETER FILTERING 

The 

ACTIVE

 button at the top of this area must be 

selected or filtering will not occur. Only the select-

ed parameters are included in the Snapshot. The 

OTHERS

 button refers to DSP functions other than 

those listed. 

INT 1–4

 are the internal effects. 

•  CHANNEL FILTERING SELECT 

Click on the BANK 1–4 or MATRIX A–H buttons 

and select the desired channels for that bank from 

the list on the right. Only the selected channels are 

included in the Snapshot. 

•  CHANNELS FILTERED Displays the selected chan-

nels for the current Snapshot. 

6.9 Aux Master

Figure 6-20 AUX MASTER

Press the 

AUX MSTR

 QuickMix button to display the 

AUX MASTER Touchscreen. The 12 Master Aux Send 

levels are controlled by their corresponding QuickMix 

knobs. Change the selected Aux Master by pressing the 

desired knob. The active Aux Master is displayed on the 

top-left of the Touchscreen. 

The overview information for the selected Aux Master 

is displayed on the top-half of the Touchscreen: meter-

ing, link status, compression and EQ. 

Each Aux Send Master also has its own OVERVIEW 

Touchscreen (see page 37), which can be displayed by 

pressing the 

FAT

 QuickMix button. 

EQ and Comp 

Touch the EQ or compressor areas (or press the 

EQ

or 

DYN

 QuickMix buttons) to open their respective 

Touchscreens. See 

Six-Band Equalizer

 and 

Compressor

on page 40. 

LINK 

If the selected Aux Master is stereo linked, the linked 

Aux number is listed below 

LINK

; it displays OFF other-

wise.