Mackie TT24 Quick Start Manual - 6.14.4 Metering

50

TT24 DIGITAL LIVE CONSOLE

TT24 DIGIT

AL LIVE C

ONS

OLE

GRP ASSIGN 

Select 

L/R

 in the GRP ASSIGN area to route to stereo 

source to the 

LEFT

 and 

RIGHT MAINS

 outputs. 

INPUT METERS 

The meters show the pre-fader, pre-L/R assign level of 

the stereo input. 

6.14.4 METERING

Figure 6-36 UTILITY METERING

These meters show the levels for the Group/Matrix 

outputs. 

6.14.5 USER BANK

Figure 6-37 UTILITY USER BANK

To access the user bank, simply press the ANLG and 

DGTL bank select buttons simultaneously. They will 

both illuminate and the faders will snap to their current 

settings, indicating the TT24 is in the user bank. 

The user bank configuration screen (Utility/User 

Bank) has a grid of buttons labeled 1-24 that allows you 

to pick which channel will be assigned to the user bank. 

A scrolling list of all channels is available to select the 

user bank channels. Changes to the user bank are im-

mediate upon selection. This control is available via TT 

control or LCD.

6.14.6 TEST TONES

Figure 6-38 UTILITY TEST TONES

A test tone + oscillator function provides a selection 

of test signals including: 

White noise 

Pink noise 

Sine and square waves of 100 Hz, 440 Hz, 1 kHz, 

and 10 kHz

Test tone signals can be routed to any of the following 

destinations: 

Matrix A-H 

Auxes 1-12 

L-R 

Ctr/Mono

There is a separate test tone activation button, level 

control, and meter for your convenience. Access to the 

test tone oscillator section is provided in TT control and 

the LCD via UTILITY/TEST TONE.