MadgeTech CTL2000 User Manual - Ctl2000
CTL2000
Reading Rate 4 readings per second up to 1 reading every 24 hours
Memory 129,024 readings per channel
LED Functionality:
Green LED:
• Blinks every 2 seconds to indicate unit is logging
• Blinks every 5 seconds to indicate unit is in delay start mode
Start Modes
Software programmable immediate start, pushbutton or delay start up
to six months in advance.
Password Protection
An optional password may be programmed into the device to
restrict access to configuration options. Data may be read without
the password.
Memory Wrap
Around
Yes
Battery Type (4) 7.2V lithium battery included; user replaceable
Battery Life 4 years typical at a 15 minute reading rate
Calibration
MadgeTech recommends annual factory calibration.
Digital calibration within the software is also available.
Calibration Date Automatically recorded within the device
Data Format Date and time stamped ºC, ºF, K, ºR, mV, V
Time Accuracy ±1 minute/month
Computer Interface IFC200 USB (Interface cable required)
Operating System
Compatibility
XP SP3/Vista/Windows 7/Windows 8
MadgeTech Software
Compatibility
• Standard Software version 4.2.3.0 or later
• Secure Software version 4.2.2.0 or later
Operating
Environment
Continuous use: -20 °C to +100 °C (-4 °F to +212 °F)
0 %RH to 100 %RH
IP Rating IP67
Dimensions 8.1 in x 6.5 in x 3.1 in (205 mm x 165 mm x 80 mm)
Weight 3.1 lb (49 oz)
Materials
• Enclosure & Hook:
316 Stainless Steel
• Gasket Seal:
EPDM rubber
(NSF-51)
CTL2000 General Specifications
8