1. DL manuals
  2. MadgeTech
  3. Data Loggers
  4. CTL2000
  5. User Manual

MadgeTech CTL2000 User Manual - Product User Guide

Summary of CTL2000

  • Page 1

    Ctl2000 to view the full madgetech product line, visit our website at www.Madgetech.Co.Nz. Ctl2000 carcass temperature data logger with 8 remote thermocouple channels product user guide.

  • Page 2: Product User Guide

    Product user guide to view the full madgetech product line, visit our website at www.Madgetech.Co.Nz. Ctl2000 data logger complete system .......................................... 1 quick start steps ........................................... 1 product overview .......................................

  • Page 3: Complete System

    1 complete system quick start steps 1. Install the madgetech 4 software and usb drivers onto a windows pc. 2. The ifc200 interface device is a usb style interface; plug the usb portion of the interface into an available usb port on the pc and plug the opposite end of the cable into the communication...

  • Page 4: Product User Guide

    Product user guide product overview madgetech’s redesigned ctl2000 carcass temperature data logger is a rugged, one of a kind solution for temperature monitoring during carcass pasteurization cycles. Equipped with eight thermocouple ports, the ctl2000 monitors and records the temperatures of various...

  • Page 5: Ctl2000

    Ctl2000 additional features and operation password settings a password of a device that supports password capabilities can be set to protect it from being altered by unauthorized users. If the device does not have password capabilities, no password information will be displayed on the device propert...

  • Page 6: Product User Guide

    Product user guide 4 additional features and operation enable/disable channels by default, all channels are enabled. To disable one or more channels follow the steps below. To enable or disable a channel of a device: 1. In the connected devices panel, select the intended device to enable/disable a c...

  • Page 7: Ctl2000

    Ctl2000 5 installation guide installing the interface cable insert the ifc200 into a usb port. The drivers will install automatically. A blue light will illuminate on the ifc200 indicating successful installation. Installing the software insert the madgetech 4 software flash drive into an open usb p...

  • Page 8: Product User Guide

    Product user guide 6 product maintenance recalibration the ctl2000 standard calibration for the ambient channel are two points at 25 °c and 60 °c. The standard calibration for the thermocouple channel is one point at 0 mv. Madgetech recommends annual factory calibration, a reminder is automatically ...

  • Page 9: Ctl2000

    Ctl2000 7 rma instructions to send a device back in to madgetech, follow the instructions below to create an rma (return merchandise authorization) on the madgetech website: 1. Visit www.Madgetech.Com , under the services tab select rma process . 2. When the web page opens, please sign in. If this i...

  • Page 10: Ctl2000

    Ctl2000 reading rate 4 readings per second up to 1 reading every 24 hours memory 129,024 readings per channel led functionality: green led: • blinks every 2 seconds to indicate unit is logging • blinks every 5 seconds to indicate unit is in delay start mode start modes software programmable immediat...

  • Page 11: Ctl2000

    Ctl2000 8 internal channels internal channel temperature sensor semiconductor temperature range -20 °c to +100 °c (-4 °f to +212 °f) temperature resolution 0.01 °c (0.018 °f) calibrated accuracy ±0.5 °c (0 °c to +50 °c) 8 remote channels remote channel temperature sensor compatible with type k only ...

  • Page 12: Troubleshooting Tips

    Troubleshooting tips why is the data logger not appearing in the software? If the ctl2000 doesn’t appear in the connected devices panel, or an error message is displayed while using the ctl2000, try the following: • ensure the only show claimed wireless devices checkbox is unchecked. • check that th...