MadgeTech CTL2000 User Manual - Complete System
1
Complete System
Quick Start Steps
1.
Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.
2.
The IFC200 interface device is a USB style interface; plug the USB portion of the
interface into an available USB port on the PC and plug the opposite end of the
cable into the communication port on the CTL2000.
3.
Launch the MadgeTech 4 Software. The CTL2000 will appear in the connected devices
window indicating the device has been recognized.
4.
Select the start method, reading rate and any other parameters appropriate for the
desired data logging application. Once configured, deploy the data logger by clicking
the
Start
icon.
5.
To download data, select the device in the list, click the
Stop
icon, and then click the
Download
icon. A graph will automatically display the data.
Product Operation (Plugged In)
CTL2000 Data Logger
MadgeTech 4 Software
Data Logger
Interface Device
& USB Cable
IFC200
Interface Cable
Type K Thermocouple
CTL2000