Magicar 2W9000PRO User Manual - page 8
Page 15
Page 14
The only feature operating in valet mode is the keyless entry function.
Valet Mode is very useful when loaning your vehicle or having it serviced.
In order to enter Valet mode, press Buttons
HiKiiiI
simultaneously for a 1/2 second.
In order to manually enter Valet Mode, insert your car key into the ignition and turn
the ignition on and off
(between ACC and ON)
five times within 10 seconds.
Valet Mode
You can exit Valet Mode only by pressing Buttons
HiKiiiI
simultaneously for a 1/2 second.
Timer Start Mode
In Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours
depending on preset options during the time of installation for a 24-hour period.
This mode is deleted automatically after 24 hours or once you start your car with
either your manual key or remote-pager. In order to enter Timer Start Mode,
press Buttons
(II+IV)
simultaneously for a 1/2 second.
Also, note that Timer Start Mode becomes
Cold Start Mode
once an
optional temperature sensor is installed.
Important!
Timer Start Mode should be used only in open areas.
Never start and run the vehicle in an enclosed space such
as a garage or carport.
Safety Shut Down Features
MAGICAR 2W9000Pro, 2W9000Pro-2
nd
system has several shut down safety
features. The following actions will shut down the engine or prevent the car from
auto-starting : Opening of the car engine hood, Pressing of the brake or
Valet mode
is turned on.
The optional RPS is a feature that allows an individual to page the owner of a
vehicle by simply tapping on the front windshield of the car. RPS is automatically
turned on upon activating alarm mode (pressing Button I for a 1/2 second) on the
2W9000Pro 2W9000Pro, 2W9000Pro-2
nd
.
The RPS module can be activated by tapping a manual key producing a
high-frequency vibration. This high-frequency vibration is detected and your
remote-pager will beep and a telephone icon will appear on theGLO LCD indicating
that someone is paging you from your vehicle.
Press Button
I, II, III
or
IV
for a 1/2 second to deactivate the RPS visual and
audible paging alerts.
RPS (Remote Paging System)
OPTIONAL PROGRAMMABLE FEATURES
These additional programmable features can be programmed to the MAGICAR
system by your authorized MAGICAR dealer.
Ignition Lock
This programmable option enables your vehicle to automatically lock the doors
When the brake pedal is pressed after starting the vehicle with a key.
In addition, the vehicle will automatically unlock the doors upon pulling the key out
from the ignition. However, if the emergency brake wire was installed, the vehicle
will unlock upon the emergency brake is set if the engine is still running with the
key. This option must be chosen at the time of installation.
You can turn this function on or off by pressing Buttons
(II+III)
for a 1/2 second.
When set to passive arming, your security system will arm automatically 30
seconds after all the car doors are closed. There are two types of passive arming
that can be programmed by your MAGICAR dealership: (1) passive arming with
passive lock and (2) passive arming with active lock.
Passive Arming