MagicBox Arden Manual - page 10
10
Tune to an FM preset station
In FM mode:
1 Press the ‘Preset’ button Preset location 1 will be displayed
2 Turn the rotary ‘Tune’ control to display the preset location
(1-10) that you would like to select Press the ‘Tune’ control
The radio will instantly tune to the stored station and begin
to play
Alternatively, for preset locations 1, 2 and 3, you can simply
press the ‘1’, ‘2’ or ‘3’ button on the front of the radio for quick
and fast access to stations stored there
Note: If no FM station has been stored under a preset
location, ‘Preset Empty X’ is displayed and after a few
seconds the display will revert to the previously selected
station
FM display information
When listening to an FM station you can change the
information that will appear on the second line of the display
There are six different types of information that are sent by
the broadcaster
Dynamic Label Segment (DLS) - this is scrolling text
information supplied by the broadcaster Information could
be the name of an artist or music title, DJ’s name, contact
details for the radio station etc
Program Type (PTY) - such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
Signal Strength - An empty will appear on the second line
of the display to indicate the minimum signal strength for
acceptable listening The row of solid rectangles indicate the
actual signal strength that you are receiving The stronger
the signal, the further to the right the row of solid rectangles
will be
Time - supplied by the broadcaster
Frequency - eg: 89 60 MHz
Signal Information - depending on the quality of the signal
the radio will automatically switch between ‘Stereo’ and
‘Mono’ When ‘Auto’ or ‘Mono’ is displayed, press the rotary
‘Tune’ control to switch between each mode
1 Press the ‘Info’ button repeatedly to move through the
display options