MagicBox Arden Manual - page 8
8
Note: If there is already an existing DAB+ station stored
under a preset location, it will be over written when you store
the new station
Tune to a DAB+ preset station
In DAB+ mode:
1 Press the ‘Preset’ button Preset location 1 will be displayed
2 Turn the rotary ‘Tune’ control to display the preset location
(1-10) that you would like to select Press the ‘Tune’ control
The radio will instantly tune to the stored station and begin
to play
Alternatively, for preset locations 1, 2 and 3, you can simply
press the ‘1’, ‘2’ or ‘3’ button on the front of the radio for quick
and fast access to stations stored there
Note: If no DAB+ station has been stored under a preset
location, ‘Preset Empty X’ is displayed and after a few
seconds the display will revert to the previously selected
station
DAB+ display information
When listening to a DAB+ station you can change the
information that will appear on the second line of the
display There are several different types of information that
are sent by the broadcaster
Dynamic Label Segment (DLS) - this is scrolling text
information supplied by the broadcaster Information could
be the name of an artist or music title, DJ’s name, contact
details for the radio station etc
Program Type (PTY) - such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
Multiplex Name - displays the broadcasting area and
collection of radio stations on this frequency eg:
BBC National DAB, Digital 1 Network
Signal Strength - An empty will appear on the second line
of the display to indicate the minimum signal strength for
acceptable listening The row of solid rectangles indicate the
actual signal strength that you are receiving The stronger
the signal, the further to the right the row of solid rectangles
will be
Time - supplied by the broadcaster
Channel and Frequency - eg: 12B 225 64 MHz
Signal Information - Stereo or Mono and the data rate at
which the signal is being transmitted
1 Press the ‘Info’ button repeatedly to move through the
display options