MagicBox Arden Manual - page 7
7
2. Press the ‘
Scan
’ button to begin a local search for stations.
The display will change to ‘
Autotune Quick scan
’, followed
by ‘
Searching...
’. A progress bar will show the progress of
the scan and the number of stations found during the scan
will also be displayed. A local scan takes approximately 10
seconds.
3. Press and hold the ‘
Scan
’ button for 2 seconds to begin a
wider, national and local scan. The display will change to
‘
Autotune Full scan’
, followed by ‘
Searching..
.’. A progress
bar will show the progress of the scan and the number of
stations found during the scan will also be displayed. A
national and local scan takes approximately 1 minute but can
take up to 3 minutes.
Manual tune
Using the manual tune feature you can select a specific
digital radio channel frequency and then manually adjust
the aerial, or the location of the radio, to get the strongest
possible signal for that channel in your location.
1. Press and hold the rotary ‘
Tune
’ control until ‘Manual tune’ is
displayed.
2. Turn the rotary ‘
Tune
’ control to scroll through the digital
radio frequencies. Stop when the frequency you would like
to listen to is displayed and your radio will then attempt to
tune to that frequency. ‘
Tuning...’
will be displayed.
Note:
You may need to adjust the aerial or move your radio
to get the strongest possible signal.
3. Press the rotary ‘
Tune
’ control to display the radio text for
the frequency that you have selected. ‘
MAN
’ will also be
displayed in the top right of the display to remind you that
you are in Manual tune mode.
4. Press the rotary ‘
Tune
’ control again to return to DAB+
autotune mode. ‘
DAB
’ will be displayed in the top right of
the display.
Storing a DAB+ station preset
Your radio can store up to 10 DAB+ stations in its preset
memories for instant access to your favourite stations.
Note:
When you store DAB+ radio station presets, these do
not overwrite your FM station presets.
1. Tune your radio to the station that you wish to preset (see
changing DAB+ stations, page 6).
2. Press and hold the ‘
Preset
’ button. Preset location 1 will be
displayed.
3. Turn the rotary ‘
Tune
’ control to the preset location that you
would like to store the radio station to (1-10). Press the ‘
Tune
’
control to save the station to the displayed preset location.
The display will confirm ‘
Preset X stored
’, where ‘X’ is the
number of the preset location (1-10).