Magma EXPRESSBOX 3400 User Manual - page 19
ExpressBox 3400
Connect PCIe Cable (STEP 5)
Connect one end of the PCIe cable to the back of
port of the Expansion Interface card, see pictures below.
Connect the other end of the PCIe cable to host computer (x8 port), see pictures below.
Electrostatic Discharge (ESD) Warning
The PCIe cables
are sensitive to electrostatic discharge (ESD).
precautions and packaging when handling the cables or when performing
installation and/or maintenance
To Disconnect Cable
ExpressBox 3400 | Chapter 2 Hardware Installation
the back of the Magma expansion unit, make sure to use the x8
, see pictures below.
PCIe cable to host computer (x8 port), see pictures below.
Electrostatic Discharge (ESD) Warning
The PCIe cables are high performance communication cables and as such
are sensitive to electrostatic discharge (ESD). Use appropriate anti
precautions and packaging when handling the cables or when performing
installation and/or maintenance
1. Pull the orange tab while slowly pulling out the cable from
the interface card.
2. Failure to pull the orange tab while disconnecting the
can break the connector inside the Interface card.
Magma
Chapter 2 Hardware Installation
19
the Magma expansion unit, make sure to use the x8
are high performance communication cables and as such
Use appropriate anti-static
precautions and packaging when handling the cables or when performing
cable from
cting the cable
Interface card.