Magma ExpressBox 3T EB3T User Manual - page 19
Manual is about: Thunderbolt to PCIe Expansion
of
71
Magma
ExpressBox 3T | Chapter 3 Verify Installation
19
LEDs D6 and D8 are illuminated when power cord is attached to expansion unit. This means the expansion unit is on standby-
mode. See picture below.
FIGURE T2-C
NOTE: If the above LEDs are not coming ON, please check the power standby cable make sure it is firmly connected to
Thunderbolt Interface card power connector (J7). See page 25.