Magna Carta FacilityPro POS 3000 Installation And User Manual - page 13
13 FacilityPro POS 3000 manual, version MAN9 PS3000 UKED 4512.doc
2.
Make sure there is a service group called ‘POS’ (or similar).
3.
Make sure there is a service called ‘POS’ (or similar) in the service group mentioned in
the previous step, with a price of € 655,35 (or other currency). This is a dummy price.
4.
Make sure the location for the terminal has been created in the table of locations.
5.
Make sure the terminal group the terminal will belong to has been created in the table
of terminal groups.
6.
Choose menu
Terminals
.
7.
Choose
Terminals
.
8.
If there is more than one terminal group: select the terminal group to which the
FacilityPro POS 3000 must belong.
9.
Click on the function button New.
10.
Click in the field ‘Terminal’.
11.
Type the name of the new terminal (e.g. ‘
cash register 4
’).
12.
Click on the arrow next to the field ‘Machine type’.
13.
Select the machine type ‘POS’.
14.
Click on the arrow next to the field ‘Collector’.
15.
Select the workstation that will be the collector for this terminal. (This is not necessary
if the terminal will be audited manually).
16.
Click in the field ‘Serial number’.
17.
Type the serial number of the Magnabox. It begins with ‘mb’ or ‘MB’. The serial number
is visible on the display of the Magnabox.
18.
Click on the arrow next to the field ‘Connection’.
19.
Select ‘Network’ if the terminal will be audited and configured via Ethernet LAN or
telephone network. Otherwise, select ‘Handheld’.
20.
Click on the arrow next to the field ‘Location’.
21.
Select the location of the terminal.
22.
If you have filled in ‘Network’ in the field ‘Connection’ and the terminal will be audited
and configured via Ethernet LAN: click in the field ‘IP-address’ and type the IP-address.
23.
If you have filled in ‘Network’ in the field ‘Connection’ and the terminal will be audited
and configured via analogue or mobile telephone network, a dial-up connection should
be defined in Windows and added to the dial-up connections known to FacilityPro
Manager (see the FacilityPro Manager user manual). Enter the name of the dial-up
connection in the field ‘Dial-up connection’ and enter the phone number in the field
‘Phone’.
24.
On the tab ‘Services’ fill in the service ‘POS’ (see step 3).
25.
Click on the function button Apply.
26.
Click OK. The new terminal will be saved. The record list will include the name of this
new terminal.
4.2.2
Determining the parameter values for the FacilityPro POS 3000
There are a number of parameters that determine how a FacilityPro POS 3000 will operate, and
that must be assigned the correct value for your site. Some of these parameters are found on
the machine type data screen, some on the terminal data screen and some on the site data
screen. These are:
On the machine type data screen (in alphabetical order):