Magna Carta FacilityPro POS 3000 Installation And User Manual - page 16
FacilityPro POS 3000 manual, version MAN9 PS3000 UKED 4512.doc 16
g)
‘\3’ this text must be on the 3rd line
h)
‘\4’ this text must be on the 4th line
On the site data screen:
1)
Site code
2)
System currency
3)
Language choice in the terminals
9
: this field contains a list of which languages
will be used in the terminals of the site. If this list is not empty, the messages
shown on the displays of the terminals will be shown in the language shown in
the first position by default. The card holder can toggle between the selected
languages (in the order seen in this list) using the language button on the card
reader at the terminals. Languages can be removed and added to the list using
the > and
the language determined in the terminal at delivery as the first language
(presumably the language of your site) and all other available languages for
toggling, starting with the language following the default language, in this
order: Dutch – English – German – French - Portuguese. Defining only one or two
languages in this list will make the omitted languages unavailable on the
terminals, which could be desirable on your site.
How to edit the values of the parameters:
1.
In the machine types data screen select the machine type of your FacilityPro POS 3000
(e.g. ‘POS’). You will see the present values of the parameters on the tab ‘Parameters’ as
in Figure 4-5.
2.
On the tab ‘Parameters’ edit the value of the parameters if this is necessary to meet the
demands of your cash register or POS machine or to accommodate the desires of your
site. If you want to edit the default value of parameters that are not shown on the tab
‘Parameters’ you will have to use the button Add parameter to add them to the tab (see
the FacilityPro Manager user manual).
3.
If you wish, change the value of the parameter ‘Welcome text 1’ and ‘Welcome text 2’ on
the tab ‘Other’ of the terminals data screen.
4.
If you wish, change the value of the parameters ‘Site code’ and ‘Language choice in the
terminals’ on the tab ‘Settings’ of the site data screen.
5.
If you wish, change the value of the parameter ‘System currency’ on the tab ‘System
currency’ of the site data screen.
6.
Click Apply.
7.
Click OK.
9
If a terminal has a descriptor version lower than desv0011 (this can be checked in field
‘Descriptor version’ on the ‘Settings’ tab of the terminals data screen) the terminal will not be
able to toggle languages and will not be affected by the languages selected in this list.