Magnavox 50MF231D - 50" Digital Widescreen Plasma Tv User Manual - page 24
20
Connect Accessory Devices
file : conn us top05 vcr -tv g.eps
RECORDER
OUT
IN
OUT
3
AV1 :
L + R + VIDEO
CABLE
AUDIO IN
VIDEO IN
AV1
Recorder (VCR / DVD+RW)
Note: Do not place your recorder too close to the screen as some recorders may be
susceptible for signals from the display. Keep a minimum distance of 20” from the screen.
&
Connect the RF Antenna or Cable TV cable (eventually via an optional two-way
signal splitter and/or Cable TV converter box) 1 to the
RF IN
socket of your
recorder.
é
Connect another RF cable 2 from the output
OUT
of your recorder to the
TV’s
CABLE/ANTENNA 75
Ω
x jack.
“
Better playback quality can be obtained if you also connect the Video, Audio Left
and Right (only for stereo devices) AV cables 3 to the
VIDEO
,
AUDIO L
and
R
input jacks of
AV1
.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO
input of
AV3 instead of connecting the recorder to the
VIDEO
jack of
AV1
.
S-Video does not provide audio, so audio cables must still be connected to
Audio L and R of AV3 to provide sound.
c on n
u s e nt r y0 5
v cr &a v 1 .e ps
RECORDER
OUT
IN
CABLE
OUT
IN
OUT
1
2
AV1 :
L + R + VIDEO
3
AV2 :
L + R + VIDEO
5
4
AUDIO IN
VIDEO IN
AV1
AV2
AUDIO IN
VIDEO IN
&
Connect the RF antenna cable 1 of the
RF IN
socket of your other AV device.
é
Connect the RF output of the AV device to the RF input of the recorder 2.
“
Connect another RF cable 4 from the output
OUT
of your recorder to the
TV’s input
CABLE/ANTENNA 75 Ω
x jack.
‘
To obtain better quality, also connect the Video, Audio left and Audio right cables
of both devices to
AV1
(
VIDEO
and
AUDIO L
and
R
,) 5 and to
AV2
(
VIDEO
and
AUDIO L
and
R
) 3.
Notes:
- In case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal
loudspeakers.
- When using the
S-VIDEO
connector do not connect any device to the
AV3 VIDEO
input.
Recorder and other A/V devices
English
F
rançaise
Español
Clear region ratings
This function allows you to clear all the Region Ratings settings.
&
Select Clear region ratings with the cursor down.
é
Press the cursor right to enter the list. You are asked to enter your code. (See
below).
Set/Change PIN
&
Select Set or Change PIN with the cursor down.
é
If no PIN-code exists yet, the menu item is set to Set PIN. Follow the
instructions on screen.
If a PIN-code has previously been entered, the menu item is set to
Change PIN
. Follow the instructions on screen.
All number combinations from 0000 to 9999 are valid numbers.
“
The Menu preferences menu reappears with a message confirming that
the PIN has been created.
“
Select Start now.
‘
Press
OK
to activate.
Note:
- The above 2 features (Region ratings lock and Clear region ratings) will be available only in
sets manufactured after the cut-off timeline, specified by the FCC mandate.
English_DFU_37132.indd 20
2006-07-12 9:45:57 AM