Magnavox MSB5660 Owner's Manual - Adjusting The Volume
– 12 –
Adjusting the Volume
(default: level 19)
1
To increase or decrease the volume, press
VOL+/-
on the Remote Control.
Volume levels
LED lighting patterns
Description
0
All White indicators blink continuously.
1
-
6
(6 levels)
The amount of the LED lights will increase or
decrease as follows:
level1 level2 level3 level4 level5 level6
dark
bright
7
-
12
(6 levels)
13
-
18
(6 levels)
19
-
24
(6 levels)
25
-
30
(6 levels)
31
-
35
(5 levels)
• Pressing and holding
VOL+
or
VOL-
will increase or decrease the volume. When the Volume has reached the maximum, all White
indicators
fl
ash twice. When the Volume has reached
“ 0 ”
or you pressed
, all White indicators blink continuously.
• When the Volume setting is made, the White indicators go back to light the current input.
2
To Mute the sound, press
on the Remote Control.
Volume levels
LED lighting patterns
Description
0 or Mute
All White indicators blink continuously
• While
“ Mute ”
is On, all White indicators blink continuously.
• When
“ Mute ”
is Off, the White indicators with the previous Volume setting will
fl
ash once, then go back to light the current input.
• To unmute or recover the sound, press
again or press
VOL+/-
.
NOTE(S)
• The Volume might be in
fl
uenced by MP3 or Bluetooth player. If the Volume is too low, adjust the Volume on the connected device.
• If the Volume level is set above 19 when the Soundbar is Turned Off, the volume will automatically be reset to 19 when the Soundbar is turned back On.
Experiencing the Surround Sound
(5.1ch)
1
Press
on the Remote Control to activate the Surround sound.
• The LED lighting pattern will
fl
ash, then go back to light the current input with the
SURROUND
indicator.
e.g.)
When
OPTICAL
was selected.
2
If you want to set Surround sound to Off, press
on the Remote Control once again.
• The LED lighting pattern will
fl
ash, then the
SURROUND
indicator lights Off.
e.g.)
When
OPTICAL
was selected.