Magnavox MSB5660 Owner's Manual - page 14
– 14 –
Confirming the Sound Output from the Speakers
1
Press and hold
for more than 5 seconds on the Remote Control to begin the Speaker check.
2
All Speakers and the Subwoofer will emit sound in sequence as follows.
• When Speaker check begins, all LED indicators will
fl
ash
fl
owing side to side for a moment.
• “Left-Channel”, “Center”, “Right-Channel” will be heard from the Main unit.
• “Left Surround”, “Right Surround” will be heard from the Satellite speakers and beep sound from the subwoofer.
3
When Left and Right sounds from the Satellite speakers are heard from opposite positions, unplug
the AC Power cord of the Subwoofer and disconnect LEFT and RIGHT cables, then place them in an
appropriate position and reconnect all cables again.
Using Bluetooth compatible Device
Pairing Bluetooth compatible Device with this Unit
1
Press
on the Remote Control to switch
the Soundbar to Bluetooth Mode.
2
Turn your Bluetooth compatible Device On and
activate the Bluetooth setting.
3
Press
on the Remote Control to prepare
the Soundbar to pairing Bluetooth.
4
On the Bluetooth compatible Device, set the
Bluetooth function On, then search and select
“MAGNAVOX_MSB5660”.
(See the user manual of the Bluetooth compatible
Device on how to enable Bluetooth.)
• If the Soundbar name does not appear on the Bluetooth
compatible Device, press
on the Remote Control once again.
*1
This Soundbar’s name is “
MAGNAVOX_MSB5660
”. If this
Soundbar has already been registered to a Bluetooth compatible
Device and the connection fails, delete it (or deactivate it), then
press
and select this Soundbar’s name to connect.
*2
Only one Bluetooth compatible Device can be connected to
this soundbar at a time. To play music from a different Bluetooth
compatible Device please complete the “Pairing a Bluetooth
compatible Device with this unit” with the other device.
5
When the pairing is complete, your Bluetooth
compatible Device may show “Connected” on
the display.
NOTE(S)
• If reconnecting the Bluetooth compatible Device to the Soundbar fails, delete the registered pro
fi
le of this Soundbar from the Bluetooth compatible
Device, then perform pairing again. This Unit can store up to 8 device pro
fi
les.
• The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall, metallic casing that covers the device, or
other devices nearby that operate in the same frequency.
• If you want to connect your Soundbar with another Bluetooth compatible Device, press
to disconnect the currently connection.
• Depending on your Bluetooth compatible Device, different behaviors may appear. See your Bluetooth compatible Device’s user manual for details.
• The operational range between the Soundbar and a Bluetooth compatible Device is approximately 30 feet (10m), if there is no interference.
Playing back a music file through Bluetooth
1
Press
on the Remote Control to switch
the Soundbar to Bluetooth Mode.
• The
PAIR
(Bluetooth) indicator will light up.
2
Turn your Bluetooth compatible Device On and
activate the Bluetooth setting.
(See the user manual of the Bluetooth compatible
Device on how to enable Bluetooth.)
• If you have already paired your Bluetooth compatible Device and
the device’s Bluetooth is on then the soundbar should connect to
it automatically.
• If the Soundbar name does not appear on the Bluetooth
compatible Device, press
on the Remote Control.
3
Playback a music file on the connected
Bluetooth compatible Device.
• You may use
p
,
p
and
on the Soundbar’s Remote
Control once the Bluetooth compatible Device is connected to
this Soundbar properly.
4
To Exit Bluetooth Mode, press one of the other
INPUT
source buttons on the Remote Control.
MAKING MORE USE WITH YOUR SOUNDBAR