Magnavox MSB5660 Owner's Manual - Upgrading The Software
– 16 –
Resetting to the factory default
You can reset each settings, or delete the Bluetooth profiles that stored on the Unit by resetting the factory default.
Upgrading the Software
Magnavox continuously tries to improve its products and we strongly recommend that you Upgrade the Soundbar Software when Upgrades
are available. New Software can be downloaded from our website at
www.magnavox.com/support/download_list.php
using the model number
of your Soundbar to find information.
1
Press
to turn the Soundbar On.
2
Press
to switch the Unit to LINE input.
3
Press
5 times within 3 seconds.
• All LED indicators will blink during reset. After completion of reset, the Main unit will automatically restart then the settings are reset as follows.
–
SURROUND
sound resets to On.
–
Sound preset resets to
MOVIE
.
–
INPUT
source resets to
OPTICAL
.
–
Volume level
resets to
level 19
• All registered Bluetooth pro
fi
les will be deleted. Pairing the Bluetooth setting to this Unit again when you want to play back a music
fi
le through
the Bluetooth compatible Device.
Preparing for the Software Upgrade
You require the following equipment:
–
A PC with web browsing capability
–
An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or StuffIt for Mac OS)
–
A Blank empty clean FAT32 formatted USB Memory Stick
NOTE(S)
• Only FAT32
formatted portable memory is supported.
• Use only Software Upgrades that can be found on the Magnavox web site.
• When the Software Upgrade is running, do not press any buttons.
• Do not remove the USB Memory Stick or Turn Off the Soundbar during
the Software Upgrade.
• If an Error occurs during the Upgrade, retry the procedure or for further
assistance, please contact the Call Center.
Upgrading the Software
Find information and Software related to your Soundbar and
Download the Latest Software Upgrade file to your PC.
1
On your PC, open a web browser and go to
www.magnavox.com/support/download_list.php.
2
Enter the model number in the “Type the Model
Number...” field.
3
Click the desired Software to be Downloaded.
• Decompress the ZIP-
fi
le.
4
Copy the Upgrade file to the Empty root directory
on the clean formatted USB Memory Stick.
5
Unplug the Main unit’s AC Power cord from the
AC outlet.
6
Connect your USB Memory Stick with the
Upgrade file to the USB terminal on the rear of
the Main unit.
7
Plug the AC Power cord to the AC outlet.
• SURROUND indicator will blink while detecting the Upgrade
fi
le.
8
While the Software is Upgrading,
LINE
,
USB
,
OPTICAL
,
COAXIAL
and
AUX
Input
indicators light up.
• When the Software Upgrade is completed, all White indicators
light up for 5 seconds.
9
Unplug the AC Power cord from the AC outlet
and plug it again.