Magnum MFM-FS Product Instruction Manual - page 8
8
How to Use
1. Preparation
(1) Setting table 1 and 2
Fit (a) and (b) of table 1 and (c) and (d) of table 2 on the studs (a), (b), (c)
and (d) at the left and right sides of the side plate.
When setting Table 1, be sure to put the stopper plate in the centre. If table 1 and 2 are not properly set,
the system may not be able to fold paper correctly.
(2) Setting paper
Pull the paper stacking table out and set it while lifting the
feed table.
Raise the paper feed table lever.
Set the paper guide at the required size
of paper stock being used.
Place the paper on the feed table
with its printed side facing up.
Ensure that the paper is loaded neatly and with its leading
edge flush with the front plate of the feed tray.
Ensure that both Table 1 and 2 aren’t warped and properly fitted on the studs (a) (b) (c) and (d). If they are
improperly set, it may cause incorrect folding or injury.
CAUTION