Magnum MI-77100 Operating Manual - page 3
BASIC FUNCTIONS
This hollow chisel mortiser is designed to cut 90° in solid wood as well as other wood based stock.
The mortiser is designed to tackle a wide range of mortising applications suited to both hobbyist
and professional users. Ideal for use in any furniture making or cabinet making applications that
require mortise and tenon joinery, the unit is supplied with a set of 4 different sized chisel and bits
to help the user cut mortises of varying widths to suit the application.
The unit is also supplied with 2 different sized chisel bushings, allowing the user to install chisel
and bit sets of either 5/8" (4 supplied) or 3/4" (commonly available from other after-market sources)
shank diameter. This mortiser is designed to acommodate chisel and bit set sizes ranging from a
minimum of 1/4" up to a maximum of 5/8".
UNPACKING
Carefully unpack and remove the mortiser and its components from the box and check for
damaged or missing items as per the list of contents below.
NOTE: Please report any damaged or missing items to your distributor immediately.
LIST OF CONTENTS
QTY
A MORTISER.......................................................................1
B WORKPIECE STOP..........................................................1
C 3/4” SHANK BUSHING ADAPTER...................................1
D CHUCK KEY......................................................................1
E 3 ,4,5MM ALLEN KEY .......................................................1
F CHISEL HOLDER ..............................................................1
G HANDLE .....................................................................1
H 1/4” CHISEL AND BIT........................................................1
5/16” CHISEL AND BIT....................................................1
3/8” CHISEL AND BIT......................................................1
1/2” CHISEL AND BIT......................................................1
A
B
C
D
E
F
G
F