Mahindra XUV500 Installation Instructions Manual - page 7
of
12
Issue: 1 - 01/03/2013
Page 7 of 12
XUV500
Wiring the kit in
From inside the car, pass the tailgate ‘T harness’ out behind the LHS tail light.
Make a small cut In the wiring body grommet, then feed the cable through.
Reseat the grommet correctly into the body. Then plug the harness in line with the existing
vehicle harness and the tail light.
Refit tail light and top trim piece
Gain Access to the inside of the
cargo area, remove hidden screw
behind cover, and the manual fuel
flap opener override. You will now
be able to unclip the top of the
panel and lever it out enough to
work behind