Makita BHP442 Instruction Manual - Specifications
2
ENGLISH
SPECIFICATIONS
Model BHP442
BHP452
Concrete 13
mm
Steel 13
mm
Wood 38
mm
Wood screw
6 mm x 75 mm
10 mm x 89 mm
Capacities
Machine screw
M6
M6
High (2)
0 - 1,400
0 - 1,500
No load speed (min
-1
)
Low (1)
0 - 400
0 - 400
High (2)
0 - 21,000
0 - 22,500
Blows per minute
Low (1)
0 - 6,000
0 - 6,000
Overall length
215 mm
215 mm
Net weight
1.7 kg (BL1430)
1.8 kg (BL1830)
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END001-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
For Model BHP442
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-1:
Sound pressure level (L
pA
) : 79 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG203-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
For Model BHP452
ENG101-1
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-1:
Sound pressure level (L
pA
) : 79 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
ENG203-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG302-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
ENH102-6
EC-DECLARATION OF CONFORMITY
Model; BHP442,BHP452
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014 in accordance with Council
Directives, 2004/108/EC, 98/37/EC.
CE2006