1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless oil-impulse driver bts130 006795.
2 english (original instructions) specifications model bts130 machine screw m4 - m8 standard bolt m6 - m10 capacities high tensile bolt m6 - m8 no load speed (min -1 ) 0 - 2,400 impacts per minute (min -1 ) 0 - 1,600 overall length 183 mm net weight 1.7 kg rated voltage d.C.14.4 v • due to our conti...
3 interrupter (gfci) protected supply. Use of an gfci reduces the risk of electric shock. Personal safety 10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A m...
4 geb054-1 cordless impact driver safety warnings 1. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an elec...
5 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 3 2 1 012131 • always switch off the tool before installing or removing of the battery car...
6 note: • use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. Reversing switch action a b 1 006798 this tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the a side...
7 2. To install the bit, pull the sleeve in the direction of the arrow and insert the bit-piece and bit into the sleeve as far as it will go. The bit-piece should be inserted into the sleeve with its pointed end facing in. Then release the sleeve to secure the bit. 1 2 3 011407 to remove the bit, pu...
8 fastening torque fastening time proper fastening torque (s) 30 (306) 20 (204) 10 (102) m8 m6 0 0.5 1.0 n m (ft lbs) high tensile bolt 006842 hold the tool firmly and place the point of the driver bit in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off...
9 1 2 3 006260 use pliers to remove the carbon brush cap of the carbon brushes. Take out the worn carbon brushes, insert the new ones and replace the carbon brush cap in reverse. 1 006261 make sure that the carbon brush cap have fit into the holes in brush holders securely. 1 2 006304 reinstall the ...
10
11.
12 makita corporation anjo, aichi, japan www.Makita.Com 884644b2.
