- DL manuals
- Makita
- Chainsaw
- BUC300
- Instruction Manual
Makita BUC300 Instruction Manual
Summary of BUC300
Page 1
1 g english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless chain saw buc250 uc250d buc300 uc300d 011442.
Page 2: Specifications
2 english (original instructions) specifications model buc250 uc250d buc300 uc300d guide bar length 250 mm 300 mm cutting length 24 cm 30 cm standard guide bar type sprocket nose bar carving bar sprocket nose bar carving bar sprocket nose bar type 91vg 91px 25ap 91vg 91px 25ap 90px pitch 9.5 mm (3/8...
Page 3: General Power Tool Safety
3 eng905-1 noise the typical a-weighted noise level determined according to en60745: sound pressure level (l pa ) : 87.3 db (a) sound power level (l wa ) : 95.3 db (a) uncertainty (k) : 3.0 db (a) wear ear protection eng900-1 vibration the vibration total value (tri-axial vector sum) determined acco...
Page 4
4 electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as...
Page 5: Cordless Chain Saw Safety
5 27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service 28. Have your power tool serviced b...
Page 6
6 014673 − do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations. − only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chai...
Page 7: Save These Instructions.
7 − the protective brace and bib overall is made of a nylon fabric with 22 layers and protects against cuts. We strongly recommend its use. − protective gloves made of thick leather are part of the prescribed equipment and must always be worn during operation of the chain saw. − during operation of ...
Page 8
8 parts description 1 2 3 4 5 6 7 8 9 10 11 12 lever front hand guard top handle battery cartridge carabiner or rope attachment point guide bar saw chain sprocket cover chain cover lock-off button switch trigger front handle 13 14 serrated rail (claw stop) battery cover 1 3 4 5 9 2 6 8 7 13 12 11 14...
Page 9: Functional Description
9 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 010918 caution: • always switch off the tool before installing or removing of the ba...
Page 10
10 adjusting the chain lubrication 1 011459 you can adjust the oil pump feed rate with the adjusting screw. The amount of oil can be adjusted using the universal wrench. Carabiner (rope attachment point) 1 011458 carabiner (rope attachment point) is for use of tool hanging. Before using carabiner, p...
Page 11: Assembly
11 note: • the indicated capacity may be lower than the actual level during use or immediately after using the tool. • depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Assembly caution: • always be sure that the tool is swit...
Page 12
12 2 1 3 011451 adjusting saw chain tension 1 011453 the saw chain may become loose after many hours of use. From time to time check the saw chain tension before use. Move the lever in the upright position. 1 2 011454 press in the lever. With the lever depressed, make a quarter turn on it counterclo...
Page 13
13 1 2 011229 caution: • before using battery adapter, read all instructions on tools using battery. • when charging a battery cartridge, first remove it from the battery adapter and then charge it. It is not allowed to charge the battery cartridge while using battery adapter. Installing or removing...
Page 14: Operation
14 operation lubrication 1 2 3 4 010920 saw chain is automatically lubricated when the tool is in operation. Check the amount of remaining oil in the oil tank through the oil inspection window. To refill the tank, remove the cap from the oil tank opening. After refilling the tank, always screw the p...
Page 15
15 010922 if you cannot cut the timber right through with a single stroke: apply light pressure to the handle and continue sawing and draw the chain saw back a little; then apply the spike a little lower and finish the cut by raising the handle. Bucking 010941 for bucking cuts, rest the serrated rai...
Page 16
16 45 o 2 1 / 2 45 o 1 006917 − before starting felling work, ensure that: (1) only persons involved in the felling operation are in the vicinity; (2) any person involved has an unhindered path of retreat through a range of approximately 45 ° either side of the felling axis. Consider the additional ...
Page 17: Maintenance
17 maintenance caution: • always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. • always wear gloves when performing any inspection or maintenance. • never use gasoline, benzine, thinner, alcohol or the like. Discolo...
Page 18
18 cleaning guide bar 010924 chips and sawdust will build up in the guide bar groove, clogging it and impairing oil flow. Always clean out the chips and sawdust when sharpening or replacing the saw chain. Cleaning the oil discharge hole small dust or particles may be built up in the oil discharge ho...
Page 19
19 use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. Storing tool clean the tool before storing. Remove any chips and sawdust from the tool after removing the sprocket cover. After cleaning the tool, run it unde...
Page 20: Trouble Shooting
20 trouble shooting before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask makita authorized service centers, always using makita replacement parts for repairs. Adjust the guide bar a...
Page 21
21.
Page 22
22.
Page 23
23.
Page 24
24 www.Makita.Com makita jan-baptist vinkstraat 2, 3070, belgium makita corporation anjo, aichi, japan 884950g221.