Makita BUC300 Instruction Manual - Specifications
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BUC250
UC250D
BUC300
UC300D
Guide bar length
250 mm
300 mm
Cutting length
24 cm
30 cm
Standard guide
bar
Type Sprocket
nose
bar
Carving
bar
Sprocket nose bar
Carving
bar
Sprocket nose bar
Type
91VG 91PX 25AP 91VG 91PX 25AP
90PX
Pitch 9.5
mm
(3/8")
6.35 mm
(1/4")
9.5 mm (3/8")
6.35 mm
(1/4")
9.5 mm (3/8")
Gauge 1.3
mm
(0.05")
1.3 mm
(0.05")
1.3 mm (0.05")
1.3 mm
(0.05")
1.1 mm (0.043")
Standard saw
chain
No. of drive links
40 60 40 60 46
Number of teeth
6 9 6 9 6
Sprocket
Pitch 9.5
mm
(3/8")
6.35 mm
(1/4")
9.5 mm (3/8")
6.35 mm
(1/4")
9.5 mm
(3/8")
9.5 mm
(3/8")
Overall length
576 mm
589 mm
577 mm
590 mm
626 mm
627 mm
Chain speed per minute
8.3 m/s (500 m/min)
*1
4.0 kg
4.0 kg
4.0 kg
4.0 kg
Net weight
*2
4.5 kg
4.5 kg
4.6 kg
4.6 kg
Chain oil tank volume
85 cm
3
Rated voltage
D.C. 36 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
END314-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Wear eye protection.
・ Wear ear protection.
・ Wear a helmet, goggles and ear
protection.
・ Use appropriate protection for foot-leg
and hand-arm.
・ This saw is to be used by properly
trained operators only.
・ Do not expose to rain.
・ Usable with the battery converter
・ Maximum permissible cut length
・ Direction of chain travel
・ Saw chain oil adjustment
・ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE090-1
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Cd
Ni-MH
Li-ion