Modern fan / period arts fan controls our ceiling fans do not use conventional pull chains (with the exception of the industry model). When ordering your fan, you should have selected the control that was most appropriate for your fan and electrical requirements. Third party controls are generally c...
Installation instructions: with power turned off at breaker, make wire connections from the fan to the power supply at the ceiling and from the control to power at wall box as shown in the wiring diagrams below. Your fan may have dedicated neutral wires for the motor (white) and for the light (orang...
Antenna white black blue to motor- black white black to a/c power in (neutral) #003, #004 and #005 receiving unit wiring instructions: with fan suspended from ceiling and with power off at breaker box, make wire connections as shown below. The receiving unit sits in the ball hanging bracket of most ...
The #003/#004/#005 controls use a two or three component system. The wall switch and/or handset is preset to the same frequency as the receiving unit. You may want to change these settings if: (a) other rf signals or appliances are interfering with operation of your ceiling fan. (b) you are installi...
