Modern Fan Co aurora flush Installation Instructions Manual - page 5
Installation Instructions: With power turned off at breaker, make wire
connections from the fan to the power supply at the ceiling and from the
control to power at wall box as shown in the wiring diagrams below. Your fan
may have dedicated neutral wires for the motor (WHITE) and for the light
(ORANGE) or may have a common neutral (WHITE only). Note: For #009A
or #009B, refer to printed instructions included in control box/packaging.
Fan
Cap off BLUE wire
(unused load for light)
BLACK motor
WHITE neutral
AC in Load
AC in Neutral
AC in
Fan
BLUE (light)
BLACK
to motor
WHITE (neutral/common)
AC in Neutral
AC in
BLACK/White
AC in load
BLACK (motor)
BLUE
to light
GREEN- connect ground
wire to grounded
hanging bracket or
mounting plate
GREEN-
connect
ground wire
to grounded
hanging
bracket or
mounting
plate
GREEN
Ground
GREEN
Ground
#001 Wiring Diagram
#002 / #002ND Wiring Diagram
On/Off Switch (w/ #003) or
Wall Switch (w/ #004/#005 )
Fan
BLUE
BLACK
WHITE
AC in
Neutral
AC in
AC in
Load
GREEN-
connect
ground wire
to grounded
hanging
bracket or
mounting
plate
Green
Ground
#003 / #004 / #005 Wiring Diagram
Receiving
Unit
Load
WHITE
BLACK
Cap off ORANGE*
wire if present
(unused neutral for light)
ORANGE (neutral light if wire present)*
ORANGE (neutral light if wire present)*
BLACK (motor)
WHITE (neutral/common)
BLUE (light)
* Your fan may have dedicated neutral wires for the motor (WHITE) and for
the light (ORANGE) or may have a common neutral (WHITE only).
BLACK
to motor
RU