Gec8 live owner ’ s manual 1 features: - 8 loops, 5 series loops and 3 separate loop, loop5 is stereo loop. - 2 dedicated footswitch (latch type). - individual tuner/mute switch - intuitive programming/rehearsal mode. - tiny footprint : 460(l) x 96(w) x 68(h) mm - p (stereo) outputs. Rogrammable a/b...
1- top view (2) mute/pgm (fs) (1) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ (3) bank/midi (pc#) in recall mode, shortly press this button will mute the input and switch guitar to tuner. In recall mode, these switches recall preset 1~8 separately. In recall mode, this switch changes the bank number. (4) segment led display it...
2- rear view ② dc in ① midi out ⑤ buf out power input, works with negative center should be above 350ma . Dc 9v of which the capacity this jack outputs midi pc# (program/patch change) and cc# (control change). The jack outputs buffered signal when guitar is connected to buf in. ⑦ loop1~4 s1~4 is “ s...
⑭ loop 6 ⑬ loop 7 ⑰ shadow separate loop, refer to loop8. Separate loop, refer to loop8. Connect to the external shadow switch, recall shadow presets, refer to section 5.4 ⑯ fs1(trs) ⑮ fs2 dedicated latching footswitch, stereo jack, its tip and sleeve are normally closed(indicator off), its ring con...
5 5- operation gec8 live enters recall mode after power up, switch recalls major preset 1~8, the bank number blinks when bank switch is pressed till a new rreset is recalled. Gec8 live have 6 banks, 48 major presets in total. In recall mode, mute switch mutes the input of series loops and switch the...
Connect ext. Footswitch to emotion, in recall mode, hold the ext. Footswitch for 2 seconds, gec8 live enters shadow edit mode, both the midi led and fs1 led start to flash simultaneously, the segment led shows cc# options (0~10, off). In shadow edit mode, press to select/deselect the shadow loop. Th...
Tutorial 2: persist strymon timeline trails (spill over) b2 p2, major preset: whatever, keep timeline always on in the signal chain. B2 p2, shadow preset : loop1~8 off, midi cc# option 3 (strymon on/off) ext. Footswitch on: engage timeline via. Midi, off: bypass timeline via. Midi. Note: ensure midi...
Ch2 ch1 ch3 tutorial 1 - 7 pedals & amp channel switching fx1 fx2 fx3 fx4 fx5 fx6 fx7 ch1/ch2/ch3 - amp footswitch jacks (mono). In - input of amp. Signal chain: guitar -> buffer -> loop1-> .....Loop5-> out l ->(patch cable)-> loop7->(patch cable)->loop8->amp 8 footswitch (trs) footswitch (trs) - st...
Tutorial 2 - 7 mono pedals, 1 stereo pedal (with midi) & 2 amplifiers fx1 fx2 fx3 fx4 fx5 (stereo) fx6 fx7 fx8 signal chain: guitar -> buffer -> fx6-> fx7-> fx8-> fx1->fx2->fx3->fx4->fx5(stereo) midi cable ch amp1 amp2 ch ch - mono footswitch jack for channel switching. In - input of amp. Amp1 amp2 ...
Tutorial 3 - 5 front pedals, 3 pedals in amp loop, amp with midi fx1 fx2 fx3 fx4 fx5 (stereo) fx6 fx7 fx8 signal chain: guitar -> buffer -> fx1-> fx2-> fx3-> fx4->fx5->amp preamp -> fx6->fx7->fx8->power amp midi re turn send ① ② ① midi in ② midi thru pedals in amp loop 10 amp channels and fx5 are co...