Moen GEC8 Live Owner's Manual - page 6
Connect ext. footswitch to EMOTION, in Recall mode, hold the ext. footswitch for
2 seconds, GEC8 live enters SHADOW EDIT mode, both the MIDI led and FS1
led start to flash simultaneously, the segment LED shows CC# options (0~10, off).
In SHADOW edit mode, press
to select/deselect the shadow loop.
The shadow preset is an additional preset upon its major preset, it always works
together with its active major preset. The rule is, the shadow preset loop does
Exclusive OR (XOR) operation with the major loop preset, what is it for?
(B-BANK, P-PRESET)
Tutorial 1: Master bypass
B1 P1, Major preset: loop1,2,3 on
B1 P1, Shadow preset : loop1,2,3 on
Ext. footswitch off: loop1,2,3 on, on: Master bypass.
Tutorial 2: Engage/bypass certain loop(s)
B1 P2, Major preset: loop1, 2 on (overdrive, distortion)
B1 P2, Shadow preset : loop3,4 on (delay, reverb)
Ext. footswitch off: OD+DIST (loop1,2), on: OD+DIST+Delay+Reverb (loop1,2,3,4)
Tutorial 3: rhythm / solo toggle
B1 P3, Major preset: loop1, 3 on (overdrive, chorus)
B1 P3, Shadow preset : loop1, 2, 3, 4, 5 on (overdrive, distortion, chrus, delay, boost)
Ext. footswitch off: OD+CH(loop1,3), on: DIST + DELAY + BOOST(loop2,4,5)
5.4.1 Shadow Loop preset
①
~
⑧
5.4 - SHADOW EDIT MODE
OPTION
0
1
2
3
MIDI CC#
NULL
4
5
6
7
8
9
Tap Tempo
Line6, Eventide
Tap Tempo
Strymon, Eventide
FX ON/OFF
Line6, Eventide
FX ON/OFF
Strymon, Eventide
Boost +1dB
Timeline
Boost +2dB
Timeline
Boost +3dB
Timeline
Level +1dB
Mobius
Level +2dB
Mobius
Level +3dB
Mobius
6
The ext. switch also provides pre-programmed options (0~9, off) of midi CC# (on
channel 1), push BANK to change the option, push MUTE to confirm the option.
MIDI CC# MAP:
5.4.2 Shadow M idi preset
Tutorial 1: Strymon Tap Tempo input
B2 P1, Major preset: loop1,2,3 on
B2 P1, Shadow preset : loop1~8 off, MIDI CC# option 1, Strymon
Ext. footswitch off: send tap tempo, on: send tap tempo.
Note: ensure midi cable is connected between GEC and Strymon
XOR TRUTH TABLE
major
shadow
ext. switch off
preset
preset
ext. switch on
( 0: loop off, 1: loop on )
0
0
0
0
0
1
1
0
1
0
1
1
0
0
0
0
1
1
0
1