Moen GEC9 Owner's Manual - 1- Overview
Rear Panel
2
1- Overview
LP1
LP2
LP3
LP4
LP5
LP6
1
2
3
4
5
Top Panel
6
11
12
16
17
18
19
7
9
8
10
10
15
14
13
(1) PRESETS
These switches instantly recall the settings stored in the corresponding PRESET 1-5
(2) MUTE/CLEAN
(3) BANK UP / DOWN
(4) LOOP1~6 Program Keys
when pressed, press the active PRESET switch again will bypass whole loops. All
This switch instantly shuts off the LOOP OUT (LOUT1&LOUT2) and switches the
INPUT to CLEAN jack, press it again will get back to normal operation.
BANK UP/DOWN switch increases/decreases the BANK, there are 10 BANKS
(A,b,C,d,E,F, G, H, I, J) available.
These keys turn on / off LOOP1 to LOOP6 separately, the signal goes through the
LOOP when a LOOP is on( LED on), LOOP off (LED off) means the LOOP is bypassed.
(5) LOOP7~9 Program Keys
These keys turn on / off LOOP7 to LOOP9 separately.
(6) NUMERICAL BANK DISPLAY
It indicates the active BANK.
presets are stored in nonvolatile memory, will not be erased even without power supply.