N-Com MCS II Instructions For Use Manual - page 14
14
4. OPERATION OF THE MCS II SYSTEM
Hook up the cable to the motorcycle, then to the MCS II system. The audio of
the system installed on the motorcycle is now transferred to the helmet.
You can use the interphone system on the motorcycle by connecting both the
pilot’s helmet and the passenger’s to the motorcycle. Each helmet must be
equipped with the MCS II system.
Volume levels of the radio and of intercom have to be set from the
motorbike’s audio system, as desired.
When using the INTERCOM function, the volume has to be set at a
comfortable level for conversation. Do not increase the volume too much to
avoid background interference.
For all audio settings and adjustments, please read your motorbike manual.
Warning: Connect the cables so that they are free and do not hinder riding
nor reduce the freedom of movement, and do not wind them around the
limbs, bust or neck. Do not lock the connectors so that, if necessary, they
can be easily disconnected.
Warning: While using the connection cable, always use helmets provided
with a visor, and keep the visor in lowered position
5. MAINTENANCE
The N-Com does not require any special maintenance tasks.
In case you use the kit when it rains, dry off the wet parts of the helmet.