N-Tron 102MC User Manual & Installation Manual - page 13
(Revised 2010-11-15)
13
KEY SPECIFICATIONS
Physical
Height:
3.49"
Width:
2.01"
Depth:
4.00"
Weight:
0.75 lbs
DIN-Rail:
35mm
Electrical
Redundant Input Voltage:
10-30 VDC (Regulated)
Input Current:
80 mA @ 24VDC (Steady State)
Inrush Current:
7.3Amp/1.0ms @ 24VDC
Input Ripple:
Less than 100 mV
Input Wire Size:
16-28 AWG
Environmental
Operating Temp:
-40oC to 80oC
Storage Temp:
-40oC to 85oC
Operating Humidity:
10% to 90% (Non Condensing)
Operating Altitude:
0 to 10,000 ft.
Shock and Vibration
Shock:
200g @ 10ms
Vibration/Seismic:
50g, 5-200Hz, Triaxial
Note: Unit must be Bulkhead mounted to achieve these levels.
Reliability
MTBF:
>2Million Hours
Network Media
10BaseT:
>Cat3 Cable
10BaseFL:
50/125 µm Fiber @ 850nm
62.5/125 µm Fiber @ 850nm
100/140 µm and 200 µm Fiber @ 850nm
Connectors
10BaseT:
One (1) RJ-45 Copper Port
10BaseFL:
SC or ST Duplex Port
Recommended Wiring Clearance:
Top: 1 " (2.54 cm)
Front: 4 " (10.16 cm)
Emissions and Safety Approvals:
FCC Part 15 Class A
Suitable for use in Class I, Division 2, Groups A, B, C and D Hazardous Locations, or Nonhazardous Locations only.
Warranty: Effective January 1, 2008, all N-TRON products carry a 3 year limited warranty from the date of purchase.