NAD M15 HD Owner's Manual - page 29

Speaker Setup: from the Speaker Setup menu, go to “Speaker 

Configuration” sub-menu and change “Subwoofer” from “On” to “Off”: 

“Front” becomes “Large”

2  With the above settings, scroll to “A/V Presets” from the SETUP MENU 

page. Use [ S ] to access “A/V Presets” menu.

3  At “A/V Presets” page, set “Preset: 1” to the following conditions - use  

[ D/F ] to select “Yes” or “No” and press [ENTER] to confirm selection 

and move on to the next setting. 

While at “Save Current Setup to Preset” menu line, use [ S ] to save the 

above settings to Preset 1. Below OSD will be shown, affirming that the 

above settings are now saved to “Preset 1”. 

When you recall “Preset 1” using the remote control (for HTRM, “A/V 

PSET” + “1”), the above preset values allocated at “Preset 1” (preset 

settings as shown in the OSD captures at Step 1) will be recalled and 

effected at the current source.

4  Now, repeat again Step 1 above but this time with the following 

settings

Listening Mode:  PLIIx Music

DSP Options:  0ms

OPERATION

USING THE M15 HD – SETUP MENU

29

ENGLISH

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ