NAD T 747 Owner's Manual - page 23
Source
The T 747 is equipped with ten configurable Sources (Source 1 -10). The
settings for each Source are dependent on the configurations set forth in
the parameters for that particular Source window.
While at “Source” line item, use [
] keys to toggle through the Sources.
NOTE
Source4isdefaultedtoiPod.ForSource4tobechangedandassigned
tootherinputs,goto“iPodSetup”menuunderthe“SourceSetup”menu.
AtiPodSetupmenu,set“Enabled”to“No”–youcannowassignSource4
tootherinputsorsettingsasdesired.
Enable
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
To enable or disable a particular Source, scroll to “Enabled”, press [ ] and
then [
] to select “Yes” or “No”.
Name
A new Name maybe assigned to a Source label. For example, if your DVD player
is attached to “Source 1”, it is possible to rename “Source 1” to “DVD Player”.
In order to rename the Source label, scroll to “Name”, press [ ] and then [
]
to pick and select through the alphanumeric selections.
Press [
] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as eight
characters.
The new Name will be shown in the VFD as well as on the OSD.
Analog Audio
The T 747 has nine analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, 7.1 Input,
Audio Front and Audio MP can be variably assigned to each Source.
Scroll to “Analog Audio” and then press [ ] to select and assign an analog
audio input to the particular Source. If “Off” is selected, no incoming analog
audio signal is selected by the particular Source.
NOTE
Anincomingdigitalsignalpresentattheassigneddigitalinputwillalways
takeprecedenceovertheassignedanalogaudioinput,evenifbothare
present.TomaintaintheanalogaudioinputfortheparticularSource,select
“Off”atthe“DigitalAudio”settingofthesame“Source”menu.
Gain
Gain adjustment allows all sources to play back at the same volume so you
don’t need to adjust the volume every time a new source is selected. It is
generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to “Gain”, press [ ] and then [
] to step through the desired level
from -12dB to 12dB.
Digital Audio
To take advantage of the T 747’s high performance surround and digital
audio circuitry, it is advisable that its Digital Audio inputs are selected.
There are ten Digital Audio inputs selectable for the T 747. They are the
following:
• HDMI 1, HDMI 2, HDMI 3, HDMI 4
• Optical 1, Optical 2, Optical Front
• Coaxial 1, Coaxial 2
Another option is “Off” whereby no incoming digital audio signal is selected
by the particular Source.
NOTE
Anincomingdigitalsignalpresentattheassigneddigitalinputwillalways
takeprecedenceovertheassignedanalogaudioinput,evenifbothare
present.TomaintaintheanalogaudioinputfortheparticularSource,select
“Off”atthe“DigitalAudio”settingofthesame“Source”menu.
Video
A specific video input can be assigned a particular Source. The following are
the assignable Video inputs:
• HDMI 1, HDMI 2, HDMI 3, HDMI 4
• Component 1, Component 2, Component 3
• S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video Front
• Composite 1, Composite 2, Composite 3, Composite 4,
Composite Front
Another option is “Off” wherein the particular Source is prompted not to
select any Video input.
A/V Preset
A particular Source can be assigned a stored Preset. The parameters set up
in the selected Preset number will be adopted into the particular Source it
is assigned (Please refer to the separate section on “A/V PRESET” above for
further understanding of Preset settings).
Scrolling to “A/V Preset” and by pressing [ ] and then [
] keys, a
Source could be assigned a Preset number ranging from Preset 1 to 5.
If it is desired not to assign the particular Source a Preset setting, select
“None”.
Trigger Out
The Trigger Out for a particular Source is dependent on the configurations
done in a separate menu on Trigger Setup (See “TRIGGER SETUP” below). If
Trigger output is assigned to “Source Setup” in the separate “Trigger Setup”
menu window, +12V will be available at +12V TRIGGER OUT port whenever
a Source with “Trigger Out” set to “Yes” is recalled.
Another option is “None” whereby the particular Source is not assigned any
Trigger Out.
OPERATION
USING THE T 747 – SETUP MENU
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й