Nagel FOLDNAK 4 User Manual - page 9
9
6.3 Staple error control
The foldnak is equipped with a staple
error control. The staple error control
stops the machine triggering when there
is a staple jam in the stapler head. In
this condition the driver jumps out of
its suspension and touches the spiral
contact (fig003, 15). This causes the red
signal light to illuminate. Then the
driver has to be hung again after any
stapler remnants have been removed
from the stapler head (see chap. 8.2 and
8.3).
6.4 Equipment control
The Foldnak is equipped with an
equipment control. It stops the stroke
triggering when the paper has not been
laid in correctly. The equipment control
only works when the trigger has been
correctly adjusted (see chap. 6.5.4).
6.5 Stapling brochures
6.5.1 Formats / Number of sheets
Paper formats from 140 x 210 mm to
325 x 450 mm can be processed in the
Foldnak stapling folding maching. This
includes for instance DIN A3, A4 and
A5.
The number of sheets which can be
processed in a brochure is dependant
upon the thickness of the paper and the
cover. Dependant upon the paper
quality ca. 30 sheets of 70g paper or 25
sheets of 80g paper can be processed
for brochures with 120 or 100 pages.
When a cardboard cover is used then
the number of sheets is to be reduced
accordingly.