NAPCO XP-400 Using Instruction - page 5
5
Keypad Controls and Indicators
*
Key Used to enable
special functions and
options. Press
*
and
then the corresponding
Special Function num-
ber Option (See Special
Functions, Page 10)
Bypass Key Used to
bypass zones. Press
Bypass and the corre-
sponding zone number,
and then Arm system.
Numerical Keys 1-9, 0. Used to enter
User Codes, Zone numbers, etc.
Emergency Keys Press
simultaneously to signal
an emergency condition.
Press
A
+
A
for
Auxiliary Emergency or
P
+
P
for Police Emer-
gency. (Programmable)
W
Armed Light will light when system is Armed,
and will flash when system is in Alarm.
!
Key Press to display any present
System troubles. Only available when
H
System Light is lit. (See System
troubles, Page 12)
Zone Lights (1 through 4)will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
X
Ready Light will light when all zones are se-
cure and system is ready to be Armed.
#
Key - (Reset) used to clear miss-entered
codes, reset Alarm Memory, etc..
H
System Light will light and the Keypad
sounder will pulse to indicate that a system trou-
ble is present. (See System troubles, Page 12)
I
Fire Light will light and the Keypad sounder
will pulse to indicate that a fire has been de-
tected in the system.
Y
Power Failure will light and the Keypad
sounder will pulse to indicate the absence of AC
power at the control panel. Call for service.
XP-400_RPXP4GT_OI300.02_...
page 5
Friday, January 28, 2005 13:42
Composite