1. DL manuals
  2. National Security Systems
  3. Security System
  4. D360
  5. User Manual

National Security Systems D360 User Manual

Manual is about: Command Center

Summary of D360

  • Page 1

    Security system user's guide national security systems inc (800)457-1999.

  • Page 2

    Bedroom bedroom bedroom kitchen dining room living room fire fire safety residential fire is a leading cause of accidental death. Most fire related deaths occur at night when the occupants suffocate in their sleep from smoke and deadly gases, rather than from burns. To help reduce this risk, the fol...

  • Page 3

    The d360 command center your security system helps to secure life, property and investments against fire, theft, and bodily harm. The d360 command center is an advanced digital arming station that offers a variety of features unavailable with any other system. Function, versatility, and ease of oper...

  • Page 4

    D360 command center perimeter interior instant all instant delay test watch special partial police command d a b c 0 7 4 1 2 5 8 3 6 9 armed status indicators zone status indicators ac power indicator command mode indicator sounder function keys a, b ,c and d command bar digital keypad cmd ac 1 2 3 ...

  • Page 5

    Your command center keypad the command center is an illuminated digital arming station that is the command center of your entire security system. The command center does much more than just arm (turn-on) and disarm (turn-off) your security system; several system commands can be initiated by the comm...

  • Page 6

    Digital keypad the command center has a lighted digital keypad used to enter passcodes and system commands into the security system. As you touch the keys to enter a passcode, the command center emits a short beep tone to indicate that your entry is accepted. Command bar the command bar is used to p...

  • Page 7

    Function keys the command center has four function keys (labeled a , b , c and d ). The function keys can be used to perform system commands with the touch of one key. In addition, your alarm technician can program the function keys to perform the command functions with the touch of one key. Each ke...

  • Page 8

    Disarming (turning-off) your security system your security system is disarmed by entering your personal passcode. When your system is armed, you must enter the premises through a designated entry delay door to prevent an immediate instant alarm condition. Opening the door starts an entry delay time ...

  • Page 9

    Silencing a trouble buzzer the alarm audible has a specific period of time it sounds before it automatically shuts off. If an alarm occurs and you want to silence it before the time expires, simply enter your personal passcode and the alarm will stop. To silence your security system: • enter your pe...

  • Page 10

    3. Watch tone: when the perimeter watch mode is activated, the command center emits a brief tone to alert you when any perimeter zone is faulted. The tone sounds only when the door or window is opened. It does not sound again for that zone until the door or window is closed and then reopened. 4. Key...

  • Page 11

    Command 1 arming with command 1: 1. Ensure that all zones are secure. All of the zone status indicator lights on the command center should be off. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 1 key. The perimeter and interior indicator lights begin to flash on an...

  • Page 12

    Command 2 to use command 2: 1. Ensure that all perimeter zones are secure. (interior zones are not armed with this command and may remain faulted while arming with command 2.) 2. Press the command bar. The command mode indicator light comes on. 3. Press the 2 key. The perimeter and instant indicator...

  • Page 13

    Command 3 to use command 3: 1. Ensure that all perimeter zones are secure. (interior zones are not armed with this command and may remain faulted while arming with command 3.) 2. Press the command bar. The command mode indicator light comes on. 3. Press the 3 key. The perimeter indicator light flash...

  • Page 14

    Command 4 to use command 4: 1. Ensure that your security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 4 key. The command center sounder is silenced, and any flashing zone status indicator lights are turned off if the zone is normal. Command 4 ...

  • Page 15

    Command 4 2 to use command 4 2 : 1. Ensure that your security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press and release the 4 key. Now press and release the 2 key. 4. Your central station will notify you if there were any problems with the report. ...

  • Page 16

    Command 4 4 3. Identify yourself and your premises (account number, name, address, etc.) and advise the operator of the services you wish to have performed. 4. When the operator directs you, enter command 43 at your command center keypad. Press the command bar. The command mode indicator light comes...

  • Page 17

    Command 4 4 to use command 44: 1. Ensure that the security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 4 key then the 4 again. Audible devices (both interior and exterior) sound. To silence the audible warning, press any numeric key of the co...

  • Page 18

    Command 4 7 using command 47: 1. Ensure that your security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 4 key, and then press the 7 key. Reset detectors i have this feature. I do not have this feature. By using command 4 7, you are able to res...

  • Page 19

    Command 5 5 to change your personal passcode: 1. Ensure that your security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 5 key then the 5 key again. Your security system is now in the passcode change mode. 4. Enter the old passcode (the passcod...

  • Page 20

    Command 6 to use command 6: 1. Ensure that your security system is disarmed. 2. Press the command bar. The command mode indicator light comes on. 3. Press the 6 key. The system is now in the perimeter watch mode . 4. To exit the perimeter watch mode, press the command bar, and then 6 or arm the syst...

  • Page 21

    Command 7 to engage command 7: 1. Press the command bar. The command mode indicator light comes on. 2. Press the 7 key. 3. This command is used for the purpose of: __________________________________________. My system will create an audible alarm when using this command. My system will not create an...

  • Page 22

    Command 8 to arm with command 8: 1. Before arming with command 8, decide which zones are to be left disarmed. Fault the zones by leaving a door or window open. The zone(s) must remain open until after the exit delay time expires. 2. Press the command bar. The command mode indicator light comes on. 3...

  • Page 23

    Command 9 to engage command 9: 1. Press the command bar. The command mode indicator light comes on. 2. Press the 9 key. My system will create an audible alarm when using this command. My system will not create an audible alarm when using this command. Police alert i have this feature. I do not have ...

  • Page 24

    To use selective zone shunting: 1. Ensure that all zones are secure. 2. Start the system exit delay by entering your personal passcode or an arming command which provides exit delays. The perimeter and interior lights flash, indicating the start of the exit delay time. 3. While the system is in the ...

  • Page 25

    To arm with zones faulted: 1. Enter your personal passcode or any arming command desired. The command center then emits a "beep" tone with each keytouch indicating a zone is faulted. 2. Hold the last digit of the passcode for approximately five to ten seconds. When the arm status indicators (permite...

  • Page 26

    Security system glossary as security system technology has evolved, a special jargon has developed. Some terms widely used within the industry are these: arm and disarm–– your security system is always on allowing 24 hour fire detection and police alert (optional). Entering your personal passcode in...