NAVICOM RT-300 Installation And Operation Manual - Using The Batteries
Manual is about: VHF
of
15
10
Using the Batteries
When the battery level is low, Please replace the batteries.Before
replacing the batteries, the volume control must be rotated fully
counterclockwise, until a click is heard, to turn the power OFF. You
can replace the old batteries just with 4 new AA size battery cells.
1. Lift up the lockclip and removed Battery Door.
2. If the ALKALINE or Ni-MH batteries supplied are used (optional),
you can recharge the radio via the wall adapter (optional), to start the
charging.
3.Please connect the AC wall adapter to a standard wall socket and
insert the adapter plug into the CHG/MIC/SPK Jack on the top of the
radio. After 12 ~ 14 hrs, the batteries will be fully charged.
"AA
"SIZ
E
"AA
"SIZ
E
"AA
"SIZ
E
"AA
"SIZ
E