Navin miniHomer User Manual - page 5
NAVIN Corporation
www.navin.com.tw
Calibrating Digital Compass
The internal digital compass requires calibration for first time use,
or when the miniHomer has been moved 100miles (160km) from
the place of last calibration.
1. Lay the miniHomer on a flat surface with LCD facing up and
no metal object nearby.
2. Click Power/Mode key to select the compass mode with
compass icon
showing.
3. Press and hold Mark key for 2~3 seconds, the LCD will display
a 20 second count down.
4. Within the 20 seconds, slowly rotate the miniHomer 360
degrees twice, either clockwise or counterclockwise.
5. After the countdown is finished, the LCD will display the
direction triangle and heading number once again.
Setting Distance Unit
The distance unit for the distance measured by the miniHomer
can be changed between metric (meter/kilometer) and English
(feet/mile).
Press and hold both Mark and Power/Mode keys simultaneously
for 2~3 seconds and the distance unit will toggle.
Setting Clock
The miniHomer is able to generate satellite time with accurate
minute reading. However, depending on your time zone, the hour
reading may need to be adjusted.
1. Click Power/Mode key to select the clock mode with clock
icon
showing.
2. Press and hold Mark key to advance the hour digit for
adjustment, and release the key when correct hour is
reached.