Navin miniHomer User Manual - page 9
NAVIN Corporation
www.navin.com.tw
Manual Input Of Coordinates (Free Marking)
1. Click Power/Mode key to select Free Marking icon
to input longitude and latitude manually.
2. Press and hold Mark key, wait until the triangle pointing
forward shows up, then release Mark key and
miniHomer is now ready for entering the latitude.
Clicking Mark key toggles between selection of northern
hemisphere
and southern hemisphere . When the
correct hemisphere shows, do nothing wait for 3
seconds and the hemisphere is selected.
3. Next the first digit of latitude starts blinking, you can
click Mark key repeatedly to advance the digit for
adjustment, when the correct digit shows wait for 3
seconds and the first digit of latitude is entered. Latitude
in ddmm.mmmm format is entered one-by-one in
sequence.
4. After latitude is entered, the longitude is to be entered
using the same method. Clicking Mark key first toggles
between selection of western hemisphere
and
eastern hemisphere
Longitude in dddmm.mmmm
format is entered in sequence. After the longitude is
entered, circle of direction arrows shows, blinking twice,
and the manually input coordinates is stored.
5. It then shows distance and direction to the manually
input and stored location under the
icon.
To make correction to the input coordinate, above steps
need to be repeated.