Navnet TZ 2 touch Installation Checklist - Appendix 1
of
8
If you have more than one network sounder in the system, please contact Furuno Tech
Support for setup information.
The DFF1-UHD is defaulted to work with NavNet TZtouch and TZtouch2 MFDs. If you
are connecting the DFF1-UHD to any TZtouch, TZtouch2, or combined system, you
do not need to change the default position of the MODE switches.
If the DFF1-UHD will be installed in a network that includes a NavNet 3D MFD (MFD8,
MFD12 or MFDBB), the DIP Switches must be changed to the position shown below.
Default settings for
TZtouch and TZtouch2
Alternate settings for
networks that include a
NavNet 3D MFD
5
DFF1-UHD MODE Switch Settings
Connection to NavNet 3D, TZtouch & TZtouch2
DIP Switches – ALL OFF
DIP Switches – 1 and 2 ON