Naxa NDL-257 Instruction Manual - page 26
Page 26
Naxa Electronics
Bluetooth
®
Mode
To set the active source mode to Bluetooth (BT):
1. Set the FUNCTION switch [1] to TV/DVD/BT/AUX.
2. Press MODE/TV MENU [4] to change from DVD to
BT mode. The FM ST/PAIR indicator [17] will light up
blue.
Use this mode to stream audio wirelessly from play-
ers with Bluetooth. Bluetooth devices may include lap-
tops, tablets, smartphones, and more. Make sure that
the device has its Bluetooth radio enabled and that it is
set to be discoverable.
Connecting a Device for the First
Time (Pairing)
Before using a wireless device with Bluetooth, you
will need to establish a connection between it and the
Boombox. This process is called “pairing” and you will
only have to do it once. Once two devices are paired,
they will automatically connect when they detect each
other.
1. When you set the Boombox to Bluetooth mode and
it does not detect a paired device, it will automati-
cally switch to pairing mode. The FM ST/PAIR in-
dicator [17] will flash blue when the Boombox is in
pairing mode.
2. On your Bluetooth device, go to its Bluetooth set-
tings menu.
3. Have your Bluetooth device “search for devices”.
Select the boombox (Naxa NDL-257) when it is
found. Enter 0000 as a passkey if the device asks
for one.
4. When pairing is complete, the Boombox will emit a
soft tone and the FM ST/PAIR indicator will light a
steady blue.
The boombox will automatically connect to your Blue-
tooth device next time as long as it has Bluetooth en-
abled, is within range, and is set to be visible to paired
devices.
L
L
If the pairing process fails, the FM ST/PAIR
indicator will flash slowly. Press PLAY/
PAUSE/ENTER/PAIR [11] to return to pairing
mode and then repeat steps 2-4.