Naxa NDL-257 Instruction Manual - page 28
Page 28
Naxa Electronics
USB/Card Mode
To set the active source mode to USB or CARD (SD):
1. Set the FUNCTION switch [1] to TV/DVD/BT/AUX.
2. Press and hold STOP/USB/CARD [10] to change
from DVD to USB or CARD (SD). The LCD screen will
display “Detecting Device” then show a list of files
on your USB drive or SD card.
L
L
A USB drive or SD card with compatible
media files must be present. If the unit
cannot find a USB drive or SD card, it will
return to DVD mode.
To change between USB, CARD, and DVD
modes, press and hold STOP/USB/CARD.
This unit will play digital media files from USB or SD
memory cards. Refer to the Specifications section to
learn more about media file compatibility.
When a USB/SD card is loaded that contains files, the
unit will read it and then list all of the files and folders
on the LCD screen.
• Use the direction buttons to browse the file/folder
list; press PLAY/PAUSE/ENTER/PAIR [11] to select
an item from the list.
• If the item selected was a folder, the unit will
display the contents of the folder.
If the item selected was a music, video, or photo file,
the unit will start playback.
Playback controls for USB/Card mode are identical to
those in DVD mode. Please refer to the following sec-
tions to learn more about the controls available to you
during digital media playback:
• DVD Mode > Playing Digital Music/Video Files
• DVD Mode > Playing Digital Photo Files