Naxa NDL-257 Instruction Manual - page 27
www.naxa.com
Page 27
L
L
There are many different Bluetooth en-
abled devices; we cannot provide instruc-
tions for all of them. Please refer to your
device manufacturer’s instructions or
website to learn more about connecting
with Bluetooth.
Playing Connected Devices
Control playback from your Bluetooth device.
Set the volume level of the Bluetooth device to maxi-
mum, then adjust the volume to a comfortable level by
turning the VOLUME dial [2] of the boombox.
Basic playback (such as play/pause, next, previous)
may also be controlled by the boombox and its remote
control if your Bluetooth device supports it.
AUX Mode
To set the active source mode to AUX input:
1. Set the FUNCTION switch [1] to TV/DVD/BT/AUX.
2. Connect an audio player to the AUX IN jack [18] on
the front of the unit with a 3.5 mm AUX cable (i.e., a
3.5 mm male-to-male stereo patch cable).
When the cable is plugged into the AUX IN jack, the unit
will automatically detect it and switch to AUX mode.
L
L
Disconnect the cable from the AUX IN jack
to return to DVD, TV, or Bluetooth mode.
When an audio player is connected:
1. Set the volume level of the connected audio player
to approximately 80%. Adjustment the volume to
a comfortable level by turning the VOLUME dial [2]
of the unit.
2. Start and control playback with the audio player.