Naxa NDL-257 Instruction Manual - page 30
Page 30
Naxa Electronics
General Setup Page
TV Display • Normal/PS: Pan and Scan. The wide-screen
image will be displayed on the screen in its na-
tive aspect ratio with some part on the left and
right cut off.
• Normal/LB: Letterbox. The wide-screen image
will be displayed in its native aspect ratio with
black bands on the upper and lower sections of
the screen.
• Wide: Widescreen (16:9). If the unit is connected
to a widescreen TV set, select this option. The
widescreen image will be displayed in full screen
in its native aspect ratio while the 4:3 image will
be stretched out horizontally to fit in the screen.
Angle
Mark
On: An angle mark is displayed on screen when an
additional camera angle is available. While the angle
mark is on screen, press the ANGLE key on the remote
to cycle through the available camera angles.
Off: Disables this function.
L
L
This function only works with those discs
mastered with multiple camera angles.
OSD Lang
On screen display language. Set the language of
the on-screen display and system menus with
this item.
Captions
On: Displays captions on screen when they are
available.
Off: Disables this function.
Screen
Saver
• On: If the image remains motionless on the screen
for several minutes, (e.g., the disc is paused,
stopped etc.) a screen saver will appear on the
screen. Press any key to exit the screen saver.
• Off: Disables this function.
Last
Memory
• On: During playback or in the paused/stopped
mode when you open the disc tray, the unit will
memorize the last playback time. The next time
that you insert the same disc and close the disc
tray to load the disc, the unit will play from the
memorized point.
• Off: Disables this function.