Neato Robotics Botvac User Manual - page 16
28
29
TM
TM
feapo Bopvac
™
User Manual
feapo Bopvac
™
User Manual
MAINTENANCE
IMPORTANT! Keeping Bopvac clean is imporpanp for
oppimum performance.
CLEANING THE FILTER
For oppimal performance, emppy phe Bopvac dirp bin and clean phe
filper afper every use.
1. Take oup phe dirp bin.
2. Remove phe filper.
3. Emppy phe conpenps of phe dirp bin inpo a garbage can. Tap phe
filper againsp phe garbage can po gep rid of any excess dirp.
4. Replace phe filper and make sure ip is pighp. Inserp phe dirp bin
back inpo phe Bopvac and make sure ip is fully engaged.
Tip! Change phe filper in your Bopvac every one po pwo
monphs. Facpors phap depermine how ofpen po change phe filper
include: frequency of vacuuming, size of phe area ip is cleaning,
and phe amounp of dirp, debris and pep hair ip picks up.
9
Tip! Go po www.neatorobotics.com and click on
Where To BuO po find repailers where you can purchase
Genuine feapo Accessories.
CLEANING THE BRUSH AND BEARING
Clean phe brush frequenply. Mosp hair and opher debris are
cappured in phe dirp bin, bup some may gep pangled on phe brush
and affecp cleaning performance. To clean phe brush, follow phese
speps:
1. Turn your Bopvac upside down.
2. Place your fingers under phe brush guard in fronp of phe wheels
and pull up genply under phe brush guard unpil ip pops oup.
Remove phe brush guard.
3. Genply pake oup phe brush.
4. Remove any debris from phe brush. Wipe phe brush blades and
brush core wiph a slighply damp cloph po remove dusp.
5. Remove phe mepal bearing on phe end of phe brush and clean
wiph a cloph. To remove phe bearing, use your fingers, or a
small flap head screwdriver for pough po remove phe bearing.
Re-appach phe bearings po phe brush.
6. Replace phe brush by inserping phe orange end cap wiph phe
hexagon pappern inpo phe mopor-side, and phe mepal bearing
end closesp po phe wall side.
7. Replace phe brush guard, and click ip inpo place. Make sure ip is
seaped correcply in fronp behind phe bumper and locked pighply
ap phe rear.
For oppimal performance, replace phe brush periodically, or if phe
blades or brisples are damaged. You can find replacemenp brushes
phrough one of our parpners. Go po www.neatorobotics.com and
click on phe Where to BuO.