NEC DT310 Notice - To Make An External Call

 19 

TO MAKE AN EXTERNAL CALL

When dialed telephone number is registered in Per-

sonal Directory, the corresponding name information

will be displayed on LCD of DT730 Series while you

are hearing a ringback tone or are engaged in a con-

versation. According to the initial settings, the display

may differ from the following examples. For more infor-

mation, contact the system administrator.

Lift handset or press 

 key, receive dial tone.

Dial the Central Office access code, e.g. 9.

Dial desired telephone number.

(while hearing a ringback tone)

Use handset or MIC to start a conversation.

Display indicates:

(while in a conversation)

• When dialed number is registered in Personal Directory

• When dialed number is not registered in Personal Direc-

tory

Note:

Personal Directory Name Display function is

available only for DT730 Series.

Note:

This section describes the Normal Dial Mode. 

DT730/710 DT330/310

Speaker

1:25 PM    TUE 18  MAR 2008

MIC      DND                   >>>

31313

Station Number 

of My Line

1:25 PM    TUE 18  MAR 2008

MIC      DND                   >>>

9

Dialed Code

Note:

In the above case, a maximum of eight digits of

the number (including “*”) can be displayed. If the

dialed number exceeds eight digits, “the first

seven digits of the number + *” or “the last seven

digits of the number + *” are displayed. For more

information, please contact the system adminis-

trator.

1:25 PM    TUE 18  MAR 2008

9XXXXXXXXX

 MIC                                   >>>

Dialed Code + Number

9XXXXXX*

00:05

Elapsed Time

TOM JONES

MIC       DND                   >>>

Dialed Code 

Name Information

registered in 

Personal Directory

+ Number