Northern Industrial Tools 24948 Owner's Manual - page 2
Thank you for choosing a Northern Industrial Tools product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible
for issues arising from modification. We strongly recommend this machine not be modified
and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the machine until you have first
contacted the distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This food slicer’s 7.5in. dia. stainless steel blade cuts meats, cheeses and other foods into
slices up to 1/2in. thick.
TECHNICAL SPECIFICATIONS
Item
Description
Normal voltage
110-120V AC 60Hz
Control
80 Watt AC motor
Cutting Blade
Reinforced stainless steel blade, 7.48in.
Construction
Full Steel Body
Dimensions
15.6in.L x 9.8in.W x 10.9in.H
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this
Food Slicer
until
they have read this manual and have developed a thorough understanding of how the
hand truck works.
WARNING:
The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could occur.
It must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS