Northern LED17ST User Manual - 1. Image Parameters
To change the input selection, press SOURCE to display the pop-up
menu, use up/down to highlight the desired source, then press
MENU to complete the selection.
To verify the current input selection, press SOURCE to display the
pop-up, then press SOURCE again to dismiss the pop-up.
To close any OSD window, press SOURCE twice.
1. Image Parameters
A. PICTURE Menu (BNC, & some HDMI)
Press the MENU button to bring the menu on screen, and
then the up/down buttons to move up along the main menu
selections to choose the PICTURE menu. Press the SOURCE
button to move between the left side main menu selector into
the window of menu choices and parameters.
To exit the menu system, press the MENU button twice. Settings will remain as they appear on screen.
Adjustments
Contrast:
Adjusts the range of difference between light and dark areas of the picture.
Brightness:
Adjusts the overall picture intensity.
Hue:
Increase or decrease the red/green/blue tint of the image.
Saturation:
Increase or decrease the intensity of (mix of white with) colors in the image.
Sharpness:
Change the balance between image detail (Resolution) and degree of transition between areas of di
ffering
brightness (Acutance).
Color Temp:
Adjust color reproduction: choose between
normal, warm
(more red) &
cool
(more blue) to achieve the
best visual result.
Scale:
Choose between SD 4:3 and HD 16:9 aspect ratio. If analog images appear ‘stretched’ use 4:3 scaling.
Picture Overscan:
Choose between legacy CRT-type cropping of picture edges (
On
) or display of entire image without
cropping (
Off
). Note: HDMI recognizes multiple signal types; for some types of HDMI signals Overscan is disabled.
Picture Mode:
Choose from Standard/Movie/Vivid/User for most pleasing image based on ambient light. User mode
Controls & Menu Opera n
CONTROL KEYS/BUTTONS
LED32 Buttons are located on the right underside of the bezel.
The PICTURE menu is for adjusting the image appearance.
The picture menu is for BNC. PICTURE menu options differ for VGA.
Depending on HDMI signal format, either PICTURE menu form may be displayed
Use the up & down buttons to move the yellow highghted
sub-menu selection within the sub-menu. Press the SOURCE
button to enter the selected item, you can now use the up and
down buttons to adjust the values. Press the MENU button to
exit the sub-menu and return to the main menu selector.